SewingLab

Milano

SewingLab

Milano

Asymmetric jumpsuit

Pattern characteristics: asymmetric built-in collar, one shoulder dolman sleeve, drape at waist, palazzo pants.

Style analysis: palazzo pant jumpsuit with drop waist and asymmetric details, as collar and sleeve.

Fabric: medium weight crepe or satin, ponte, or other medium weight fabrics (both knits and woven work).

Step 1

Start from a block with 12cm ease at bust, 6 to 8cm at waist, 5 to 7cm at hips, 1,5 to 2,5cm vertical ease at crotch.

Space bodice and trouser by 7 to 8cm, to merge them start from pants and:

  • on front, draw a line parallel to grainline starting in center front at waist and extend it upwards, measure the 7 to 8cm vertical gap, then place center front bodice on the line
  • on back, lengthen back crotch upwards keeping the slope, measure the gap bodice trouser matching it to front, then place back bodice.

Notice that front bodice is straight, back one is slanted.

Draw the classic pocket on front measuring 4 to 5cm sideways at waistline and 14 to 15cm down on side seam. Draw the pocket bag slightly curved as shown.

*If you want to deepen the topic of made to measure trousers and jumpsuits, learn more about pocket construction and much more you can check the program of our basic blocks course – module 3.

Draw the classic pocket on front measuring 4 to 5cm sideways at waistline and 14 to 15cm down on side seam. Draw the pocket bag slightly curved as shown.

Step 2

Now draw the slash line separating bodice and trousers – notice from the photo that waist is a bit dropped. Measure down 3 to 4cm from trouser waistline and draw a parallel to it on both front and back (see red lines here).

Draw the new bodice side seam (blue lines) as straight line from armpit to the new dropped waist.

Mirror front to have it full, mirror also back but separately (you’ll need a center back zipper for this style).

Step 3

On both front and back start drafting the built-in collar:

  • widen neckline by 3cm from high shoulder point along both shoulder lines
  • connect the new points with a straight line.

Then, still on both front and back, draw the armhole dropping 4 to 7cm from armpit along left side seam and moving in 6 to 9cm from shoulder point along shoulder line.

You need a FREE MEMBERSHIP to access next steps.

Join a vibrant community of thousand of sewers!

Do you already have an account? Login or Recover your password now

Free

€ 0 / Per month
  • Can candidate photos for pattern tutorials
  • Access 120+ free pattern tutorials
  • Access 2 NEW tutorials/month